16″ 9mm AR-9 Rifle Build Kit

(9 customer reviews)

$349.99

Build Kits come unassembled

Shooting steel case ammunition through our products voids ALL warranties!!!

SKU KIT-09-9MM-16-001 Categories ,

Description

Disclosure: Handguards will be either keymod or mlok depending on availability. This build kit will come with everything EXCEPT the stripped lower receiver to build a 16″ AR-9.

This kit includes:

  • 16″ 9mm Barrel (twist may vary)
  • 10″-15″ Free-Float Handguard (depending on availability)
  • 9mm Muzzle Device (depending on availability)
  • 9mm Stock Kit
  • 9mm BCG (glock and colt compatible)
  • 9MM Upper Receiver 
  • Standard Charging Handle
  • Complete Lower Parts Kit

Build Kits come unassembled

KIT notice as of March 1st 2020:

All build kits are subject to change slightly in this time of EXTREME demand. We are not currently able to fill specific spec requests. The kit parts will fall into the general specs above but items such as stocks, handguards, and muzzle devices are changing daily.

Disclaimer: This product is not manufactured, authorized, endorsed,  or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. “GLOCK” is a federally registered trademark of  GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and  GLOCK Ges.m.b.H. Neither Durkin Tactical, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or  GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Shooting steel case ammunition through our products voids ALL warranties!!!

Additional information

Weight 6.5 lbs

9 reviews for 16″ 9mm AR-9 Rifle Build Kit

  1. O CORTEZ

    Took a gamble on this kit and I’m glad I did. Assembly is extremely easy if you have the right tools and some experience in building AR platforms. Even got some upgraded parts with kit. Took it out and it cycled flawlessly. 147 brass and 115 steel case ammo all cycled just fine. I am impressed.

  2. John Preissman

    Have shot less than 50 rounds out of it. Have had 2 fail to ejects.My magwel adapter is used, and it has caused a lock up. I believe if I wear in the gun a bit it will be flawless.

  3. Steven M

    Seems to be a good quality product and has a great look after build, but did need a bit of filing on the selector detent track and selector detent itsself. I could not switch fire modes – the detent wasn’t sliding out of the selected positions. Got it working fine now with a bit of elbow grease. Only other thing is that I needed barrel nut shims since the alignment of the handguard isn’t achievable without them. They are not included in this kit. Have yet to test fire, but I’m thinking it’ll run fine. Fast shipping and seems like a great company to buy from. 4.5/5 stars probably more accurate.

  4. Cade Yandell

    i have put 300 rounds through this now. using my 3d printed glock 9mm adapter and spikes lower, I can say I am having a blast on such a cheap budget. Super amazing kit!

  5. Jim

    I also took a chance on this kit. First let me say the Durkin Customer Service (Lauren) is fantastic. She was quick to respond and also did a follow up to make sure the the components were delivered and that everything was working correctly. That being said, I had two troublesome issues with the parts. First the muzzle device was stripped and wouldn’t thread on the barrel. Durkin took care of this quickly and a new muzzle was sent. Second, the castle nut was not threaded correctly which stripped the buffer tube. I needed a new castle nut and buffer tube. Again, both taken care of quickly by Durkin. My issue is that this shouldn’t happen with mil-spec parts IMO. I guess with the high demand and excellent pricing they might have to select new suppliers other than what they normally use. After those two hiccups, the build went together great. Two boxes of 9mm later and the gun cycles flawlessly. I would have liked to have the LRBHO feature but it was not included on the upper or BCG. Not a show stopper for me.

  6. RDR

    Regrets !
    Regrets of not ordering 2 kits !
    I took a chance on ordering this kit for a buddy and assembled the upper for him . The upper was very impressive as all the lines and cut outs matched his Aero Precision lower Perfectly !
    It even came with a 14-15 ” mlok handguard !
    My biggest concern was not knowing what kind of buffer assembly would be included .
    Turned out to be a Guntec 8.5 extended buffer assy. But did not check spring length .
    When my buddy tried it out he text me to let me know how Excited he was about it !
    He even bragged how there was no kick to it !
    Although I already have a 9mm pcc myself that i have not tried out yet , i wanted one of these kits for myself !
    Unfortunately for me the price had gone up a couple weeks later enough for me to hold back since I have sooo many other types already ! Well another week later I decided to go ahead and order another since the kit is So nice and Still a major bargain , especially with the 12% off coupon , They are now SOLD OUT !

  7. Robert Boley

    It went together well and works flawlessly.They have a fair price on kits and many other items.Shipped in around 5 days.Good communication by email. Will buy more from them.You cant go wrong with Durkin.

  8. roachc3po1501

    Really good kit! Went together easily with my psa lower. Everything is tight & all parts accounted for. Thanks DT, I highly recommend & will buy another kit in the near future.

  9. Walter Bockstahler

    picked up a complete upper at local gun shop didn’t know anything about Durkin best thing I did shoots great started with a 308 buffer spring jammed up first 5 round replaced spring then after break-in ran perfect about 100 rounds not one miss great product keep up the great work Durkin

Add a review

Your email address will not be published. Required fields are marked *